 |
|
Products » Chloride
The chloride ion is formed when the element chlorine picks up one electron to form an anion (negatively-charged ion) Cl−. The salts of hydrochloric acid HCl contain chloride ions and can also be called chlorides. An example is table salt, which is sodium chloride with the chemical formula NaCl. In water, it dissolves into Na+ and Cl− ions.
The word chloride can also refer to a chemical compound in which one or more chlorine atoms are covalently bonded in the molecule. This means that chlorides can be either inorganic or organic compounds. The simplest example of an inorganic covalently-bonded chloride is hydrogen chloride, HCl.
Aluminium Chloride
PRODUCT INFORMATION : ALUMINIUM CHLORIDE (ANHYDROUS)
APPEARANCE : YELLOWISH WHITE
MOLECULAR FORMULA : ALCL3
CAS. NO. : 7446-70-0
TYPICAL SPECIFICATION
PURITY : 98.0 % MIN. BY WT.
FE CONTENT : 100 PPM max
IN SOLUBLE IN WATER : 00.02 % MAX. BY WT
Mg. CONTENT : < 150 ppm
Zn CONTENT : <400 ppm
GRADE
GRDE (CRYSTAL / GRANULAR) : 0-9 mm Crystal
PACKING : 25 KGS. HDPE BAGS WITH SUITABLE PVC INNER LINER / 250 Kg. MS Drum
Barium Chloride
Formula : BaCl2M : 2 H2O
Description : Colorless White Crystal
Assay : 98.00%
Grade : Hydrous
Free Iron : 0.15%
Free Carbonate : 0.05%
Free Sulfide as S : 0.01%
Water Insoluble Matter : 0.10%
Calcium Chloride
Inhalation : Granular material does not pose a significant inhalation hazard, but inhalation of dust may cause irritation to the respiratory tract, with symptoms of coughing and shortness of breath.
Ingestion : Low toxicity material but ingestion may cause serious irritation of the mucous membrane due to heat of hydrolysis. Large amounts can cause gastrointestinal upset, vomiting, abdominal pain.
Ferrous Chloride
Fire Extinguishing Media : Water, dry chemical, foam or carbon dioxide. Do not allow water runoff to enter sewers or waterways.
Special Information : In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode.
Ferric Chloride
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
Lithium Chloride
Product : Lithium Chloride Anhydrate
Assay : 98.00%
Formula : LiCl
Grade : Tech
Appearance : White / Off White Crystal
Molecular Weight : 42.39
Density (g/cm3) : 2.068
Melting Point : 614 C
Boiling Point : 1382 C
Li Content. : 15 to 16%
Magnesium Chloride
Ingestion : Since magnesium salts are slowly absorbed, abdominal pain, vomiting and diarrhea may be the only symptoms. However, if elimination is blocked by bowel blockage or other reasons, CNS depression, lack of reflexes, hypocalcemia (deficiency of calcium in the blood) may occur.
Manganese Chloride
Inhalation : Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion : Give several glasses of water to drink to dilute. If large amounts were swallowed, get medical advice.
Skin Contact : Remove any contaminated clothing. Wash skin with soap and water for at least 15 minutes. Get medical attention if irritation develops or persists.
Potassium Chloride
Ingestion : Very large doses can cause vomiting, diarrhea, and prostration. Dehydration and congestion occur in most internal organs. Hypertonic salt solutions can produce violent inflammatory reactions in the gastrointestinal tract.
Skin Contact : May irritate damaged skin; absorption can occur with effects similar to those via ingestion.
Eye Contact : Causes irritation, redness, and pain. (For salt concentrations greater than the normal saline present.)
Stannous Chloride
Inhalation : Extremely destructive to tissues of the mucous membranes and upper respiratory tract. Symptoms may include burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea and vomiting.
Ingestion : Toxic. May cause irritation or corrosion to the gastrointestinal tract with abdominal pain, nausea, and vomiting. May cause delayed death occurring from strictures of the esophagus and pylorus.
Tin Chloride
Skin Contact : May cause severe irritation, skin burns and ulcerations. Solutions are corrosive. Symptoms include redness and pain.
Eye Contact : May cause redness, pain, and blurred vision. Splashes from solutions may cause eye damage.
Chronic Exposure : Repeated skin contact can cause varying degrees of problems ranging from dermatitis to ulcerations. Repeated Inhalation can cause occupational
Zinc Chloride
Assay : 95%
P.H. : 3.1
Iron (Fe) : 2ppm
Heavy Metals : Traces
Amm.Chloride : 2%
Sulphate : Nil
Zinc Contents : 46%
Zinc Ammonium Chloride
SPECIFIC GRAVITY @ 15°C (59°F) : 2.907
FREEZING POINT or RANGE : 290°C (554°F)
SOLUBILITY IN WATER : Completely
BOILING POINT : 732°C (1350°F)
VAPOR PRESSURE : Practically zero.
PH < 2 (concentrated solutions) ; 4.0 (10% solution)
APPEARANCE AND COLOR : This product is an odorless, white, granular solid.
| |
|
 |
