Hard chromium layers (over 10 micrometres) can be used in various applications and consequently subject to different types of quality requirements. Hard chromium layers on piston rods of hydraulic cylinders are tested on corrosion resistance in salt spray cabinets. Because these are destructive tests, only representative sample material can be tested. The salt spray solutions and the conditions in the cabinet are normed as well as the evaluation of the result after the test. The duration of the test is depending the agressivity of the test and the standard the industry has developed for this type of materials. Typically for engineering purposes the hardness value will be between 800 - 1000 HV500 when subject to a Vickers hardness test. In general there is a requirement that the deposit be uniform in thickness on all surfaces, and should be smooth, homogeneous and free from frosty areas, pin holes, pits, nodules, and other defects.
